chem-scicenter172-label Printer
| Department | Chemistry |
|---|---|
| Location | Science Center 172 |
| Queue Name | chem-scicenter172-label |
| Printer Model | Dymo LabelWriter 450 Twin Turbo |
| Access | Employees |
| Print Release Station |
Dymo LabelWriter Printing Instructions
Connecting from Windows
- Click your Start button.
- In the Search box Type \\swat-print in the search box and press Enter. If prompted for credentials, enter GARNET\username in the username field, and your password.
- Find the printer queue name from the table at the top of this page.
- Double-click on the printer (it will install automatically)
Connecting from macOS
- Download and install the Mac Printer Drivers first. Download Mac Printer Driver
- Unzip and run the DLS8Setup.8.7.5.dmg installer. This installer may warn that it cannot open because it is from an unidentified publisher. You can launch the installer by control-clicking on the file and choosing "open".
- Open System Settings, select Printers & Scanners.
- Choose Add Printer, Scanner, or Fax add a printer
- Click the tab at the top of the Add Printer page
- In the Address field, type swat-print
- For Protocol, choose Line Printer Daemon - LPD
- In the Queue field, enter the printer queue name from the table at the top of this page.
- Under Name, copy and paste name from Queue field.
- Under Use, select the option for Select Software..., and search for the printer model from the table at the top of this page.
- Click Add. After you click Add, the Printer list window will reappear with the selected printer added to the list of printers.